To a reasonable extent, utilizing a vehicle dryer blower is considered the least demanding thing to work with. As all you really need is to simply guide air towards places you need to be dried. In any case, it isn’t as basic as that and requires a couple of explanations that come with basically all car dryer blower.
As soon as you’re done with washing your car, pull forward, and find a place where you can get enough space and spend a few minutes drying it.
After washing the car, first, make sure the water pressure from the hose is set to medium to rinse the car properly then you should allow water flow freely and slowly on the surface of the vehicle and wait for about 2 minutes before making use of your car dryer blower.
Apply the car dryer blower pressured air to every part of the vehicle surface while taking note of special areas like windshield wipers, running boards, etc. if a top-notch dryer is used, then you shouldn’t have difficulties getting your vehicle dry faster while ensuring difficult areas are dried as well, thereby preventing water damage.
In special cases where the nozzle your is not engineered to access certain hidden parts of your car, you can always check to see if other included accessories of your car dryer blower can do the job.
For the best results and finish while using a car dryer blower, its advisable to open your doors and trunks as well as lifting your windshield wipers to dry out all points of contact. Most times droplets are hidden in these places and would find their way out when you begin driving which would mess with the car cleaning and drying you did earlier